KBS Gold Standard Products

Metal Restoration, Protective Coatings, Rust Inhibitors and Fuel Tank Liners

   

Used by professionals worldwide, Gold Standard Fuel Tank Sealer is a superior, one part, ready-to-use fuel tank sealer that is specifically formulated to stop rust and corrosion. When used in combination with AquaKlean and RustBlast, it will form a super-tough, fuel and alcohol impervious coating, while simultaneously sealing small pinholes and weld seams. Gold Standard may be used on steel, aluminum, and fiberglass tanks. Applications include fuel tanks, diesel tanks, oil tanks, utility tanks and non-potable water tanks. It's been rated as the industry‘s NEW Gold Standard in gas tank sealers.

Notice:  These are HD high quality Industrial Chemicals and need to be handled safely always follow all warnings and safety details.  This is not your Grocery Store line of cleaners and coatings

 

*Kit also includes Black Lightning Gloves, a Piece of BackBone (Reinforcing Mesh), Brush and Stir Stick.

Always Use Supplied Gloves

All These Items are Industrial Type Products-Perfectly safe to use if instructions are followed

Follow Instructions to the Letter

No Shortcuts

 

A great 3-Step cost savings kit designed for the repair of motorcycles, generators, lawn mowers, tractors, snowmobiles, or other small tanks up to 5 gallons.

Detailed Instructions Included

Satisfaction Guaranteed!

  • Gold Standard Fuel Tank Sealer, from the makers of KBS Coatings, is a superior, single-component, ready-to-use fuel tank sealer.
  • Gold Standard Fuel Tank Sealer is specifically formulated to stop rust and corrosion by forming a tough, fuel impervious coating while simultaneously sealing small pinholes and weld seams.
  • This kit contains our KBS AquaKlean (a water-based, heavy-duty, cleaner/degreaser) and KBS RustBlast (a powerful rust remover/metal etch) to obtain a permanently sealed, rust-free fuel tank. These KBS prep products are formulated with a unique Oxygen-Block Technology which reduces the occurrence of flash rust by over 80% and extends rust-free storage times by leaving a temporary protective coating in addition to a zinc phosphate film.
  • Will Not Work on Plastic Tanks

 

 

$34.95

Shipping anywhere in the lower 48

$7.00

 

 

 

 

*Kit also includes Black Lightning Gloves, a Piece of BackBone (Reinforcing Mesh), Brush and Stir Stick.

 

 

 


 

 

 

As Above with a quart of KBS "STRIP" to remove old failing liners or paint included.

 

The KBS Cycle Tank Sealer PLUS Kit contains everything you need to strip and seal a tank of up to 5 gallons.

Special Notes on "Strip"

Harmful to: Tile, Linoleum, Asphalt, Plastics, Rubber and Synthetics.

May soften fiberglass.

Strip should be used within six months of opening or disposed of properly to avoid can deterioration.

Always Follow Detailed Instructions on all KBS Products.

 

 

$39.95

Shipping anywhere in the lower 48

$8.00

 

 

 

 

*Kit also includes Black Lightning Gloves, a Piece of BackBone (Reinforcing Mesh), Brush and Stir Stick.

 

 

Always Follow Detailed Instructions on all KBS Products.

Special Notes on "Strip"

Harmful to: Tile, Linoleum, Asphalt, Plastics, Rubber and Synthetics.

May soften fiberglass.

Strip should be used within six months of opening or disposed of properly to avoid can deterioration.

Always Follow Detailed Instructions on all KBS Products.

 

A money-saving 3-Step repair kit which includes enough products to clean, prep & permanently seal up to a 25 gallon tank. Detailed instructions included.

Satisfaction Guaranteed!

  • 1 Quart of RustBlast

  • 2 Quarts AquaKlean

  • 1 Quart of Gold Standard Tank Sealer

  • Nitrile Gloves

  • Stir Stick

  • Detailed Instructions

  • Gold Standard Fuel Tank Sealer, from the makers of KBS Coatings, is a superior, single-component, ready-to-use fuel tank sealer.
  • Gold Standard Fuel Tank Sealer is specifically formulated to stop rust and corrosion by forming a tough, fuel impervious coating while simultaneously sealing small pinholes and weld seams.
  • This kit contains our KBS AquaKlean (a water-based, heavy-duty, cleaner/degreaser) and KBS RustBlast (a powerful rust remover/metal etch) to obtain a permanently sealed, rust-free fuel tank. These KBS prep products are formulated with a unique Oxygen-Block Technology which reduces the occurrence of flash rust by over 80% and extends rust-free storage times by leaving a temporary protective coating in addition to a zinc phosphate film.
  • Will Not Work on Plastic Tanks

 

Special Notes on "Strip"

Harmful to: Tile, Linoleum, Asphalt, Plastics, Rubber and Synthetics.

May soften fiberglass.

Strip should be used within six months of opening or disposed of properly to avoid can deterioration.

 

 

 

$57.95

Shipping anywhere in the lower 48

$8.00

 

 

 

KBS STRIP

Special Notes on "Strip"

Harmful to: Tile, Linoleum, Asphalt, Plastics, Rubber and Synthetics.

May soften fiberglass.

Strip should be used within six months of opening or disposed of properly to avoid can deterioration.

 

 

 

An Aircraft Strength paint remover sprays as a semi gel coat for fast and easy coverage. This results in an even, unbroken film which seals and allows deep penetration through multiple layers of paint. Due to it’s semi gel state, Strip will cling to vertical surfaces with minimal run or sag.

Safe to use on: Furniture • Woodwork • Machinery • Masonry Antiques • Floors • Cars & Boats • Graffiti • OEM Finishes • Cars Bodies & Frames • Fuel Tanks • Floors-

When Instructions are followed

Removes: Lead-based paints • Polyurethanes • Lacquers • Shellacs • Marine Finishes • Tile & Carpet Adhesives Epoxies • Latex • Stains • Varnishes • Acrylics • Gas Tank Coatings • Most Any Finish

*Quarts and Gallons include Chemical Resistant Bottle and Sprayer.

 

$14.95Qt.

Gallons by Quote

Shipping anywhere in the lower 48

$7.00

 

 

 

ALWAYS WEAR PROTECTIVE GLOVES AND SAFETY GLASSES. ALWAYS WORK IN A WELL-VENTILATED AREA.

Please heed all labeled warning and caution notices on all products.

 

KBS Motor Coater is easy to apply, offers superb coverage and yields a self-leveling professional looking finish.

Your engine will be a show stopper at this DIY price...too bad it's kept under the hood!

 

  • Fast-drying
  • Extremely High Gloss
  • High Quality Acrylic Base
  • Brush Marks Flow Out to Glass Finish
  • Temperature Rated up to 450°F
  • Matches OEM Standards
  • Will Not Blister, Flake, Crack or Peel
  • Oil, Transmission Fluid and Gas Resistant
  • 1 Pint is Usually Enough to do an Entire Engine

Available Colors: Chevy Orange, Black, Aluminum, Ford Corporate Blue & Ford Red.

 

 

$21.00

Shipping anywhere in the lower 48

$7.00

Up to 4 Pints

  • Quart - AquaKlean
  • Quart - RustBlast
  • Pint - Motor Coater (any color)
  • 8oz. - #1 Thinner
  • Black Lightning Gloves
  • Brush
  • Stir Stick
  • Complete and Detailed Instructions

 

 

 

As every painting professional knows, the keys to any long lasting paint job are good surface prep and the use of quality materials. Our complete KBS Motor Coater Kit was developed to guarantee just that!

Available Colors: Chevy Orange, Black, Aluminum, Ford Corporate Blue & Ford Red.

$48.00

Shipping anywhere in the lower 48

$8.00

 

$108.00

Call for more info 541-942-5920

 

Call for more info

541-942-5920

$84.95

Call for more info

541-942-5920

 

  KBS Color Chart  
     

Installation Flow Chart-