541-942-5920
CD1-Pro Bracket Ignition by Daytona-Sensors
NHRA Legal for Pro Class Race Cars
Click for full size image
Daytona built this ignition system specifically for the Pro Bracket Racer meeting all NHRA regulations specific to the class. This box has all the power of the CD1 without the extra features specific to Super-Pro.
If you run both Pro and Super Pro this box is Legal in both.
|
|
NEW Product from Daytona-Sensors Introducing the New CD1-PRO We worked closely with Daytona Sensors to develop this ignition system specifically for the Pro Class Bracket racer. This Powerful CD Ignition Box has been designed specifically for NHRA Pro Bracket Racers. Programmable timing curve, 2 step integral REV Limiters, 135 MJ output, NHRA Inspected and Approved!
Built in America for American Racers! |
CD-1 Pro Ignition Box & Coil
P/N 104001 and coil P/N 102002
Introductory Offer $499.00 for Both!
\
Compatible with 4-6-8 cylinder engines with distributor type ignition.
Not compatible with odd firing V6 engines.
135 MJ spark energy output.
Digitally set launch and maximum RPM limits with 100 RPM steps from 3,000 to 9,900 RPM
(10,900 RPM for maximum RPM limit). Dial Control No More Pills
PC programmable advance features ranging from a simple RPM based advance curve to a 3D timing map with boost proportional retard.
Dedicated input terminals for launch RPM and manifold pressure.
One general purpose input and two general purpose input/output terminals. Inputs can be programmed for high gear retard, RPM limit, and throttle position sensor. Outputs can be programmed for RPM window switch, nitrous system activation, and multi-gear shift light functions.
Fully encapsulated construction. 12 pin Deutsch connector used for signal connections.
Compact size. Module is 7.0” x 5.25” x 1.9”. Coil is 4.4” x 3.2” x 3.0”.
Made in USA for the ultimate in reliability.
*The parts bag supplied with the CD-1 includes a signal harness that plugs into the 12 terminal Deutsch connector, ring tongue terminals for power and ignition coil connections, and a set of Weather Pack connectors for Tach and PC link hookup. To complete the installation, some applications may require additional wire, crimp terminals, fuses, switches, and relays. The Appendix includes a list of recommended parts and suppliers.
FBO Systems-USA & Canada
Cottage Grove, Oregon
541-942-5920
Main Link
www.4secondsflat.com/Ignition.html
FBO Systems UK
The Friars, Aylesford, Kent, UK
01622 609040
FBO Systems-Estonia
FBO Australia
Marian Kolesar
FBO Switzerland
Michael
Not all products are available as in stock from all Dealers Worldwide, contact a store near you for availability and pricing.
541-942-5920
